Optical Image Stabilizer; Vqt0V10 - Panasonic Lumix DMC-LS2 Operating Instructions Manual

Advanced
Optical Image
Stabilizer
SCN
This mode detects jitter and compensates
for it.
1 Press and hold the optical image
stabilizer button A until
[STABILIZER] appears.
2 Press 3/4 to select the
stabilizer function mode and then
press [MENU/SET].
STABILIZER
OFF
MODE1
MODE2
SELECT
MODE1 The stabilizer operates
( ) continuously and can assist
during photo composition.
MODE2 The jitter is compensated for
( ) when the shutter button is
pressed. There is a greater
stabilizing effect.
OFF When you want to take a picture
( ) with jitter.
∫ Demonstration of the optical image
stabilizer (Demonstration Mode)
Press 1 to display the demonstration. After
the demonstration ends, the screen returns
to the stabilizer function mode selection
menu. Press 1 again if you want to exit the
demonstration before it ends. While the
demonstration is displayed, the optical
44

VQT0V10

1 2
SCN
MENU
MENU
SET DEMO.
SET
zoom is fixed to Wide (1k) and the zoom
function cannot be activated. You also
cannot take pictures.
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• In simple mode [
[MODE2] and in [STARRY SKY] (P52) in
scene mode it is fixed to [OFF]. The
stabilizer function mode selection menu
does not appear.
• In motion picture mode [
cannot be set.
], the setting is fixed to
], [MODE2]