[Af Mode]; Setting The Focus Method - Panasonic Lumix DMC-LS2 Operating Instructions Manual

∫ When the aspect ratio is [
(4.5M) 2560k1712 pixels
(2.5M EZ) 2048k1360 pixels
∫ When the aspect ratio is [
(3.5M) 2560k1440 pixels
(2M EZ) 1920k1080 pixels
∫ Quality
You can increase the number of recordable
pictures without changing the picture size if
quality is set to [STANDARD].
Fine (Low compression):
This gives priority to picture quality.
Picture quality will be high.
Standard (High compression):
This gives priority to the number of
recordable pictures. Standard
quality pictures are recorded.
• The number of pixels that can be selected
differs depending on the aspect ratio. If
you change the aspect ratio, set the
picture size.
• "EZ" is an abbreviation of
[Extended optical Zoom]. This is a
function which further extends the optical
zoom ratio. If you select a picture size with
EZ displayed, the zoom ratio is extended
to a maximum of 3.8k when the digital
zoom is set to [OFF]. (P29)
• In motion picture mode [
size is fixed to QVGA (320k240 pixels).
• Pictures may appear mosaic depending
on the subject and the recording
conditions.
• Refer to P91 for information about the
number of recordable pictures.
• The number of recordable pictures
depends on the subject.
• The number of recordable pictures
displayed on the screen may not
correspond with recorded frames.
]. • In simple mode [
].
Press [
menu and select the item to set. (P59)
Select the mode that matches the
recording conditions and the composition.
The camera focuses on
any of 5 focus areas.
This is effective when
the subject is not in the
center of the screen.
The camera quickly
focuses on any of
3 focus areas points –
left, right or center. This
is effective when the
], the picture
subject is not in the
center of the screen.
The camera quickly
focuses on the subject
in the AF area on the
center of the screen.
as follows.
– ENLARGE:
[ ] (5M [ ])/Fine
– 4qk6q/10k15cm:
[ ] (2.5M EZ [
– E-MAIL:
[ ] (0.3M EZ [

[AF MODE]

Setting the focus method

1
SCN
MENU
] to display the [REC] mode
SET
(5-area-focusing):
[3-area-focusing (High speed)]:
[1-area-focusing (High speed)]:
Menu Settings
], the settings become
])/Standard
])/Standard
2
SCN
VQT0V10
63