[Ext.flash]; Using An Optional Flash - Panasonic Lumix DMC-FZ50 Operating Instructions Manual

• The full range of the zoom can be used
when using the close-up lens.
• Digital zoom cannot be used when using a
wide conversion lens.
• When there is dirt (water, oil, and
fingerprints, etc.) on the surface of the
lens, the image may be affected. Lightly
wipe the surface of the lens with a soft,
dry cloth before and after taking pictures.
• Ensure that [CONVERSION] is set to
[OFF] when not using a conversion lens or
close up lens.
• When using the conversion lens or
close-up lens:
– If you set [CONVERSION] to [OFF], the
performance of the conversion lens or
close-up lens will not be optimal.
• When using the tele conversion lens:
–We recommend using a tripod.
– The stabilizer function may not work
sufficiently.
– The focus indication may light due to the
jitter even if the subject is not focused.
– The time required for focusing may
become longer than usual.
• If you set [CONVERSION] to [
[ ], you cannot use the built-in flash or
C
AF assist lamp. (P91)
• Read the operating instructions of the
conversion lens for details.

[EXT.FLASH]

Using an optional flash

MENU
Press [ ] to display the [REC] mode
SET
menu and select the item to set. (P82)
After attaching the external flash, the
effective range will be increased when
compared to the camera's built in flash.
Using the dedicated flash
(DMW-FL500/DMW-FL360; optional)
1 Attach the dedicated flash to the
hot shoe
camera and the dedicated flash.
], [ ] or
• Be sure to firmly secure to dedicated
flash with the lock ring
2 Press
[ ].
3 Press
/
settings and then press
[MENU/SET].
FLASH
FORCED FLASH ON
FORCED OFF
SELECT
Menu Settings
and then turn on the
.
to switch the flash
MENU
SET
MENU
SET
99
VQT0X92