Optical Image Stabilizer - Panasonic Lumix DMC-FZ50 Operating Instructions Manual

Advanced
Optical Image
Stabilizer
This mode detects jitter and compensates
for it.
1 Press and hold the optical image
stabilizer button until
[STABILIZER] appears.
2 Press
/ to select the
stabilizer function mode and then
press [MENU/SET].
STABILIZER
OFF
MODE1
MODE2
MENU
SELECT SET DEMO.
[MODE1] The stabilizer operates
( ) continuously and can assist
during photo composition.
[MODE2] The jitter is compensated for
( ) when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF] When you want to take a
( ) picture with jitter.
Demonstration of the optical image
stabilizer (Demonstration Mode)
Press to display the demonstration. After
the demonstration ends, the screen returns
to the stabilizer function mode selection
menu. Press again if you want to exit the
demonstration before it ends.
54
VQT0X92
While the demonstration is displayed, you
cannot take pictures.
While the demonstration is displayed, set
the optical zoom to Wide (1 ).
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• The setting is fixed to [OFF] in
[STARRY SKY] (P68) in scene mode. The
stabilizer function mode selection menu
does not appear.
• In motion picture mode [
[PANNING] in scene mode, [MODE2]
cannot be set.
MENU
SET
] or