Panasonic Lumix DMC-FZ50 Operating Instructions Manual page 29

[PLAY ON LCD]
Press [ MENU ] to display the [SETUP] menu
SET
and select this item. (P27)
[ON]: If you were using the viewfinder to
record, the display automatically
switches to the LCD monitor when
reviewing or playing back pictures.
(P44)
[OFF]: Does not automatically switch.
[POWER SAVE]
MENU
Press [ ] to display the [SETUP] menu
SET
and select this item. (P27)
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
Power save mode is activated (the
camera is automatically turned off to
save the battery life) if the camera
has not been used for the time
selected on the setting.
[OFF]: Power save mode is not activated.
• Press the shutter button halfway or turn
the camera off and on to cancel power
save mode.
• When using the AC adaptor (DMW-AC7;
optional), connecting to a PC or a printer,
recording or playing back motion pictures
and during a slide show, power save
mode is not activated. (However, the
setting for power save mode is fixed to
[10MIN.] while pausing a slide show or
playing back a manual slide show.)
[MF ASSIST]
(Recording mode only)
MENU
Press [ ] to display the [SETUP] menu
SET
and select this item. (P27)
In manual focus, the assistance screen
appears on the center of the screen to
facilitate focusing on the subject. (P60)
[MF1]: The center of the screen is
enlarged. You can adjust the focus
while determining the composition
of the whole of the screen.
[MF2]: The whole of the screen is enlarged.
This is convenient for adjusting the
focus in Wide angle shots.
[OFF]: The screen is not enlarged.
[BEEP]
Press [ MENU ] to display the [SETUP] menu
SET
and select this item. (P27)
[ ]: No operation sound
[ ]: Soft operation sound
[ ]: Loud operation sound
[AF BEEP]
MENU
Press [ ] to display the [SETUP] menu
SET
and select this item. (P27)
[ ]: No operation sound
[ ]: Soft operation sound
[ ]: Loud operation sound
[SHUTTER]
MENU
Press [ ] to display the [SETUP] menu
SET
and select this item. (P27)
Set to select the volume of shutter sound.
[ ]: No shutter sound
[ ]: Soft shutter sound
[ ]: Loud shutter sound
[VOLUME]
MENU
Press [ ] to display the [SETUP] menu
SET
and select this item. (P27)
The volume of speakers can be adjusted in
7 steps from level 6 to 0.
• When you connect the camera to a TV,
the volume of the TV speakers does not
change.
[NO.RESET]
Press [ MENU ] to display the [SETUP] menu
SET
and select this item. (P27)
Set this when you want the file number of
the next recording to start from 0001. (The
folder number is updated and the file
number starts from 0001.)
• A folder number between 100 and 999
can be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data
on a PC or elsewhere.
Preparation
29
VQT0X92