Air Filter Installation - Trane 4YCC4024E1060 Installation And Operation Manual

H H i i g g h h A A l l t t i i t t u u d d e e I I n n s s t t a a l l l l a a t t i i o o n n
Input ratings (BTUH) of these furnaces are based on
sea level operation and should not be changed at
elevations up to 2000 ft. If the unit installation is from
Table 12. Orifice Twist Drill Size
Orifice Twist
Drill Size if
Installed at
2000
Sea Level
32 33
33 35
37 38
49 50
52 52
Table 13. Orifice Part Numbers
Part
Drill Size
Number
32 ORF01307
33 ORF0134
34 ORF01335
35 ORF01407
36 ORF01408
37 ORF01406
38 ORF01306
39 ORF01409
40 ORF01336

Air Filter Installation

The packaged unit requires an air filter. The unit does
not come with a factory installed filter rack in it,
however, two filter frame accessories are offered that
will allow the installation of a filter within the unit,
BAYFLTR101 & BAYFLTR201. Otherwise a field
supplied filter rack must be installed by the installer in
the return duct work.
18-EB40D1-1C-EN
Altitude Above Sea Level and Orifice Change Required for that Elevation
3000 4000
34 35
35 36
39 39
50 50
53 53
From National Fuel Gas Code — Table F-4
Part
Drill Size
Number
41 ORF01413
42 ORF01410
49 ORF01333
50 ORF01332
51 ORF01336
52 ORF01331
53 ORF01411
54 ORF01412
2000 to 8000 feet elevation, then change the burner
orifices to the size listed in
Table 13, p. 21 for orifice part numbers.
5000 6000
35 36
36 37
40 41
51 51
53 53
Affix the filter label supplied with the unit adjacent to
the filter area. Refer to Table 14, p. 21
filter size.
Table 14. Determine Filter Size
Nominal
Unit
CFM
YC~4024A 800
YC~4030A 1000
YC~4036A 1200
YC~4042A 1400
YC~4048A 1600
YC~4060A 2000
Filters must be installed in the return air system. The above square
(a)
footages are based on 300 F.P.M. face velocity. If permanent filters
are used, size per mfg. Recommendation with clear resistance of
0.05" WC.
I I m m p p o o r r t t a a n n t t : : Air filters and media wheels or plates shall
meet the test requirements in UL 900.
U U n n i i t t I I n n s s t t a a l l l l a a t t i i o o n n
Table 12, p. 21. Refer to
7000 8000
36 37
38 38
42 42
51 52
53 54
to determine
Filter (a)
Filter Size
Resistance
(Sq Ft)
(W.C.)
2.67 0.08
3.33 0.08
4.00 0.08
4.67 0.08
5.33 0.08
6.67 0.08
21