Setting The Operations At The Time Of Start - Panasonic Lumix DMC-FS42 Operating Instructions Manual

Setting the operations at the time of start

Auto-start of PHOTOfunSTUDIO and LUMIX Simple
Viewer, as well as the auto-categorization carried out while
booting, can be set.
Select [Tools] [Settings] on the menu, and then click the
[General] tab.
A
B
C
D
E
100
Other settings
To change the settings for auto start
The operations carried out when the digital camera and
memory card are connected to the PC can be set.
A. PHOTOfunSTUDIO starts automatically.
B. LUMIX Simple Viewer starts automatically.
(only when LUMIX Simple Viewer is installed)
C. Disables auto-start.
It is impossible to start LUMIX Simple Viewer and
PHOTOfunSTUDIO simultaneously.
Setting the auto-categorization
The setting of whether to categorize the pictures existing in
the PC automatically at the time of starting
PHOTOfunSTUDIO is possible.
D. Auto-categorization is done at every start.
E. Auto-categorization is not done at every start.
Setting the operations at the time of start