Brother S-6280A Instruction Manual page 35

3. Operation panel
Parts
Item
Number
Solenoid OFF timing for
P33
continuous stop stitching
P34
Invalid
～
P36
Strength of thread presser
P37
foot at sewing start
P38
Invalid
～
P40
P41
Production counter
P42
Main control version
N01
P42
Panel control version
N02
P42
Speed signal
N03
P42
Foot pedal AD value
N04
P42 Upper Axis Angle (Needle
N05 Upper Reference)
P42 Vertical Axis Angle (Needle
N06 Lower Reference)
P42
Voltage AD value
N07
P42
N08
Invalid
～
P42
N11
P42 Detailed information when an
N12 error occurs
P43 Invalid
P44 -
P45 -
Reverse needle lifting
P46 function after thread
trimming
Reverse needle lift angle after
P47
thread trimming
P48
Min. sewing speed (sti/min)
Sewing Speed (sti/min) at
P49
Thread Cutting
P50 -
P51 -
P52 -
27
Initial
Range
value
Stitch compensation of continuous back stitch B(D) part,
150(-3) stepwise delay of 0 to 200 action. The larger the number, the
0-200
130(-5)
longer the last needle in the B(D) segment and the shorter the
first needle in the C segment.
0::Thread wiping operation
1:Thread wiping operation
6
0-11
2～11:The larger the value, the stronger the operation force of
the thread retainer.
You can view and edit production counters.
When the up-counting method (P27-N13 = 0) is selected, it can
be decreased by keying.
0
0-9999
When the down-counting method (P27-N13 = 1) is selected, it
can be incremented by the key.
12
? * The displayed value will change when the version is upgraded.
2610
? * The displayed value will change when the version is upgraded
0
?
Around
?
356
at UP
?
Around 0
at UP
Around
?
180
Around
?
285
0:Normal
0
Other information: Contact CKD for details.
16
1-45 Do not change.
Do not change.
30
1-50
ON: Reverse needle lifting operation after thread trimming
ON/OFF OFF
OFF: No reverse needle lifting operation after thread trimming
Adjust the angle to lift the needle in reverse rotation by counting
50-300 160
from the top needle position after cutting the thread.
100-500 210 Min. sewing speed when sewing with pedal operation
100-500 300 During thread cutting backtack.
10-990 150 Do not change.
1-60 30 Do not change.
10-990 120 Do not change.
S-6280A
Description
※Press and hold the key to clear the counter.