Chapter 2 Exploring Your Handheld
Locating side and back panel components
Stylus
Reset button
Stylus
Reset button
Tapping and typing
Like using a mouse to click elements on a computer screen, using the stylus to tap
elements on your handheld screen is the basic action you use to get things done on
your handheld.
The first time you start your handheld, the setup instructions appear on the screen.
These instructions include a calibration screen. For more information on
recalibrating your screen, see
IMPORTANT
the handheld screen. Never use an actual pen, pencil, or other sharp object to write
on the handheld screen as this will scratch the screen.
12
Slides in and out of the slot on the top of your handheld. To
use the stylus, slide it out of the slot and hold it as you would
a pen or pencil.
Resets your handheld. Under normal use, you should not
have to use the reset button. See
in
Appendix A
the reset button.
"Digitizer Preferences"
Always use the point of the stylus for tapping or for making strokes on
"Resetting your handheld"
for information about when and how to use
in
Chapter
14.