Outside Air And Exhaust Hood Removal; Outside Air Hood Removal - Carrier EnergyX 48HC Supplemental Installation Instructions

Outside Air and Exhaust Air Hood Removal

Outside Air Hood Removal

1. Turn off, lockout and tag- - out electrical power to unit.
2. Remove the hood by removing the seal- - tek screws
along the perimeter of the hood. See Fig. 16.
NOTE: Even after all screws have been removed from
entire perimeter of hood, it will still be difficult to remove
due to the gasket applied from original installation. Take
care not to damage the gasket. If damage occurs use
equivalent gasket to replace before reattaching the hood.
3. Disconnect the green (HIGH) and yellow (LOW)
tubes attached to the quick connects located inside the
ERV. Do NOT damage the tubes.
A
Fig. 16 - - Outside Air Hood Removal
23
Detail "A"
High and Low
Quick Connects
C13026