Palm Treo 700w User Manual page 68

8. If the passkey is not built-in, enter the same passkey on the Bluetooth device, and then press
Finish (right action key).
9. If you're connecting to a headset or hands-free car kit, check the Hands Free box, and then
press Finish
10. If you're connecting to a GPS device, press Finish
Ports tab, select the GPS device you selected in step 6, and then select New Outgoing Port.
Press Finish
11. Press OK .
12. If you're connecting to a GPS device, enter your GPS Settings (see the electronic User Guide
for more info). Be sure to select the same port you selected in step 10.
You can now communicate with this device whenever it is within range (about 30 feet in optimum
environmental conditions) and your smartphone's Bluetooth feature is turned on (see steps 1 and
2 earlier in this section). If you're using a hands-free Bluetooth device and it is within range (30
feet), your smartphone routes all calls to the hands-free device instead of your smartphone's
earpiece. When a call comes in, your smartphone rings and the car kit or headset beeps. Even if
you pick up the call on your smartphone earpiece, the call goes to the headset or car kit.
66
(right action key).
(right action key).
(right action key), select the COM