Pioneer VSX-84TXSi Service Manual page 250

1
In a case where the sound is available, but no picture
A
The setup screen will not be displayed if
the display does not support SD (480i).
B
In such a case, connect the analog video
output to the display.
If the input video signal is SD (480i), the
display may not be compatible. If the
C
display is incompatible, and if the
component video input signal is used, set
the output of the source equipment to
Progressive. If composite or S video input
signal is used, connect the analog video
output to the display. Depending on the
conditions of the input video signal, HDMI
output may not be available. In such a
case, connect the analog video output to
the display.
D
E
F
204
1
2
B
Sound is available, but no picture
Check the settings (input
setting, etc.) of the display.
YES
Is it the setup screen
that does not appear?
NO
Is the video output
setting of the HDMI equipped
component 480i?
NO
YES
Is analog video input?
NO
Turn all the connected equipment off then back
on. Disconnect then reconnect the HDMI cable.
Recheck the settings of the receiver.
VSX-74TXVi
2
3
The picture will not be displayed if the
display does not support SD (480i).
In such a case, set the HDMI equipped
YES
component to either Progressive (480p
or 720p) or HD 1080i. If only 480i output
is available with HDMI equipped
component, connect the display, using
the analog video and audio cables.
3
4
4