Installing Rail Kit; Figure 14. Rail Kit - Inner Rail Removal; Figure 15. Rail Kit - Re-Position Middle Rail - Intel D40AMP Series Integration And Service Manual

3.1.1

Installing Rail Kit

Installing the rails:
Remove the Inner Rail from the Right and Left rail assemblies.
1. Slide out the inner rail until it clicks (see Letter A).
2. Pull the white tab and slide out the inner rail completely (see Letter B).
3. Set aside the inner rail to be attached to the chassis (see Letter C).
4. Push the tab upwards (see Letter D) and slide the middle rail back inside the outer rail (see Letter E).
5. Set aside the outer rail for installation into the rack (see Letter F).
24
Intel® Server D40AMP Family Integration and Service Guide

Figure 14. Rail Kit - Inner Rail Removal

Figure 15. Rail Kit – Re-position Middle Rail