Table of Contents
Advertisement
G.8
Positioning of emergency switches
There is an emergency switch at the infeed and outfeed
conveyor of the dishwasher that are clearly visible and
identifiable and easily accessed by the operator who must
use them.
Described below a diagram with the positions of the emer-
gency switches and the operators during daily use.
I
E
R
R
E
O
L
"R"
Operator or work station
"L"
Dishwasher
"E"
Emergency switch
"I"
Infeed conveyor
"O"
Outfeed conveyor
G.9
Installation of detergent/rinse aid
dispensers
The machine is pre-configured for installation of detergent and
rinse aid dispensing devices.
The dispensers must be installed in a way that does not
compromise machine operation or safety.
The first time the machine is turned on, the dispenser should
be manually activated and filled;
WARNING
Contact with chemical substan-
ces (e. g. detergent, rinse aid,
scale remover, etc.) without
taking appropriate safety precau-
tions (e. g. personal protection
equipment) can involve expo-
sure
to
possible
Therefore always refer to the
safety cards and labels on the
products used.
CAUTION
Do not start the machine if the dispenser
devices do not meet the safety require-
ments of "EC" Directives or current
regulations in the country of use.
CAUTION
The use of "foaming"/non-specific deter-
gents or in any case detergents used in
different ways from that prescribed by the
manufacturer, can cause damage to the
dishwasher and compromise washing
results.
Detergent dispenser
• Connect the detergent pipe, coming from the external
dispenser, to "A" (see below picture).
L
O
E
R
R
E
I
chemical
risk
damage
to
health.
• Remove the cap plug;
• Connect the dispenser hose to the injector;
• Insert the inlet hose of the detergent dispenser into the
proper container.
Rinse aid dispenser
• Connect the detergent pipe, coming from the external
dispenser, to "B" (see below picture).
• Remove the cap plug;
• Connect the dispenser hose to the injector;
• Insert the inlet hose of the rinse aid dispenser into the
proper container.
B
1
2
IMPORTANT
The peristaltic dispensers (detergent and rinse aid)
and the tube inside the rinse aid dispenser require
periodical maintenance (at least once or twice a
year) or after prolonged machine idle periods.
NOTE!
To obtain excellence washing performance, use
detergent, rinse aid and descaling agent sug-
gested by Electrolux Professional. In the Electrolux
Professional web site, open the "Accessories and
Consumables" web page and navigate into the
dishwashing equipment tab to order most suitable
detergents and accessories.
G.10 Dispensers electrical connection
The electric box is equipped with a power connection terminal
for external distributor that can be used for 220 V and rated
and
current 3 A. The terminals are activated when the appliance is
on.
Connect the power supply of the dispenser between terminals
"401" and "2".
Detergent dispenser
• Connect the power supply of the detergent dispenser
between terminals "403" and "2".
These terminals will be activated during the wash phase.
Rinse aid dispenser
• Connect the power supply of the rinse aid between
terminals "407" and "2".
These terminals will be activated during the rinse phase.
A
3
41
Advertisement
Table of Contents
