LENCO PDR-026 User Manual page 8

CONTROLS AND COMPONENTS
A. Telescope antenna
B. Standby/Mode button
C. Preset 1
D. Scan button
E. Preset 2
F. Menu/Info button
G. Preset 3
H. Alarm button
I. Prev button
J. Preset button
K. Next button
L. Vol/Select button
M. Display
N. ON/OFF switch
O. Ear phone jack
P. DC input socket DC 5V
Q. Charging cable (USB to DC plug cable)
Power Supply
If operation by mains power is not possible the radio can be powered by
built-in rechargeable batteries.
1) Operation by mains
Insert the DC plug of the charging power supply into the DC input socket
DV 5V. Then plug the power supply into a mains socket.
2) Operation by batteries
Disconnect the charging power supply from the DC 5V socket.
Operation
Adjusting the antenna
For optimal reception, extend the antenna, move to fully extend and
adjust it.
Turning the unit on/off (standby)
Push the on/off switch to ON.
Press the standby button for approx. 1 second to turn on/off the unit.
8