LENCO PDR-026 User Manual page 12

•
In the display of the radio you will see the progress of the scan
and the number of stations found in the current position of
the radio.
Important
•
With DAB+ reception, there can be a very big difference in
reception level between one location and "a few meters
away". In case of a local weak DAB+ signal, move the radio to
find a stronger signal.
•
If you take the radio to another location, perform a full scan
again. This will show you which DAB+ stations can be received
there.
FM RADIO
Selecting FM Stations
1. Press the Mode button to select FM stations.
2. The radio plays the last station selected.
Selecting FM station frequencies
1. Select a FM stations.
2. Manual frequency selection
Press the buttons Prev or Next to change the frequency at intervals of 0.05
MHz.
3. Automatic frequency selection
Press the buttons Prev or Next for 1-2 seconds and the radio will stop
searching once an active station has been found.
4. If you can press the Scan button, the unit will quick search and play the
next received station.
Storing FM stations
You can store up to 30 preset FM stations.
1. Select the desired FM station.
2. Press and hold the Preset button for one second and then
12