LENCO PDR-026 User Manual page 11

browse the menu options. To confirm your selection, press Select each
time.
• <Station list>
• <Full scan>
Searches for all available DAB/DAB+ stations.
• <DRC>
Dynamic Range Control setting boosts the volume of quieter
sounds in a noisy environment.
Off/low/high
• <My EQ Setup>(XXXX)
Bass and Treble can be adjusted separately.
• <System Setting>
• <Alarm Setting>
IMPORTANT INFORMATION REGARDING DAB+ RECEPTION
DAB+ radio reception is different from FM radio reception.
•
In FM, you can often still receive a weak station, but probably
with a rustling or crackling sound.
•
DAB + reception works digitally and if there is not enough
signal you hear nothing. No hiss or crackle as with FM. This is
not due to the radio, but to the fact that there is not enough
DAB+ signal at that location.
•
DAB + rule is: no or weak reception = no sound.
What can you do if you do not have direct DAB+ reception.
•
Always point the antenna straight up vertically first.
•
Do not place the radio too close to potential sources of
interference such as, battery chargers, rotating machinery,
computers, large metal surfaces, etc.
•
Move the radio a few meters.
•
Turn on the radio and activate a full scan in the DAB+ menu
11