Oregon Scientific SL929 Hockenheim User Manual page 8

SET TIMER
1. Press MODE to switch to Timer Mode.
2. Press and hold MODE for 2 seconds to
enter the setting mode.
3. Select the hour, minute, second, and count
method. There are three count methods,
as follows:
CS - Count down and stop
CR - Countdown and repeat
CU - Countdown, then count up
Press LAP / RESET or START / STOP to
change the setting. Press MODE to
confirm.
4. To set additional Timers, press LAP/
RESET, then repeat Steps 2 - 3.
START / STOP / PAUSE TIMER
Press START / STOP.
CLEAR TIMER
Stop the timer. Then, press and hold LAP/
RESET for 2 seconds.
8