The Stopwatch will beep twice when no
more laps are available.
ERASE MEMORY SEGMENTS
1.
Stop the Stopwatch.
2.
Press and hold MODE for 2 seconds.
3.
Press and hold START / STOP for 2
seconds to erase the last memory
segment. Or, press and hold START /
STOP for 4 seconds to erase all memory
segments.
4.
Press LAP / RESET to confirm. "Erase
done" will show on the display.
PACER
The Pacer can be set to
beep at a rate of 30 - 240
steps per minute.
SET PACER
1.
Press
MODE
switch to Pacer Mode.
2.
Press and hold MODE for 2 seconds to
set the beep rate (30 - 240 beeps per
minute). Press START / STOP or LAP /
RESET to change the value. Press MODE
to confirm.
12
to