GETTING STARTED
BATTERIES
Batteries are supplied with this product.
Replace them whenever the display becomes
dim. Use a coin to remove the battery
compartment lid (on the back of the Stopwatch).
Be sure to match the correct polarity, as shown
in the battery compartment.
SAFETY CORD
Thread the safety cord through the loop on the
bottom of the unit.
SWITCH BETWEEN MODES
Press MODE.
CHANGE SETTINGS
Press and hold MODE for 2 seconds. Then,
press LAP / RESET or START / STOP to
change each setting. Press and hold for
fast-setting mode. Press MODE to switch
between options.
5