Voice Mail; Lock - Alcatel-Lucent 8001 User Manual

All manuals and user guides at all-guides.com
Invite the third party -- 1) Press "CONFERENCE" button or "CONF" in an active call;
into a conference in an
-- 2) Enter the third party number;
active call
-- 3) After connection with the third party, press "CONFERENCE"
Establish a conference -- 1) when one phone line is on-hold and the other line is busy, press
with held line
-- 3) Press the held line's programmable button, the 3-way

3.5.14 Voice Mail

When the phone gets a voice mail from server, it will light up the voice mail button
Voice Mail --1) Press the Voice Mail button (When Voice Mails are available,
-- 2) Enter the User Password
-- 3) The phone will login in to the voice mail server. You may need

3.5.15 Lock

You can enable/disable lock function thru MMI, when lock feature is enabled, a lock icon will
be shown in the main screen.
Lock -- 1) Menu -> System Settings -> Phone Settings
-- 2) Enter "Keypad Lock", click soft key "Shift" or left/right arrow key
-- 3) "Phone Lock Time Out" is used to set the interval how long the
-- 4) The lock password is controlled by Alcatel-Lucent SIP server
Alcatel-Lucent 8001 DeskPhone
ALE International proprietary and confidential. Copyright © 2016. All rights reserved.
Page 16 of 49
button or "CONF" again
"CONFERENCE" button,
- or Press "CONF" Soft key
Conference is enabled.
icon is , when no message, icon is
to follow the instructions to listen to your messages.
to choose the options:
1. "Lock All" means all the keys in phone set will be locked
2. "Lock & Auto Answer" means all the keys will be locked
while in auto answer mode it will be unlocked
3. "Lock Menu" means the "Menu" soft key will be locked
4. "Lock Function" means the function keys will be locked,
while the dialing pad will be in un-lock status
5. "Disable" means disable the "Lock "feature
set will be locked again after you unlock the set
Notes: Lock feature is a user oriented feature, if the phone set is
locked, user can unlock the status thru MMI and the phone set
always keeps in un-lock until you unlock it thru MMI. The
password of lock can be configured thru solution, like
OmniVista 8770.