Oregon Scientific 14894 Instruction Manual page 6

Mouse Connection
1. Ensure the unit is turned OFF.
2. Plug the mouse into the mouse jack on the right side of the unit.
3. Turn the unit ON.
4. To ensure the mouse is kept clean, keep it on a clean mouse pad.
Cleaning and Maintenance
The unit should be regularly examined for damage to the cord, plug, enclosure and other parts. In the event of such
damage, the unit must not be used with the adaptor until the damage has been repaired.
Always disconnect the power supply before cleaning.
Wipe the unit with a dry cloth.
Do not get the unit wet.
Do not dismantle the unit.
Cleaning the Mouse
Turn the round mouse-ball cover in counter-clockwise direction and lift open the cover.
Take the ball out, and wipe the ball and the inside of the mouse with a dry cloth cleaning out all the dust.
Starting Zip the Robot Learning PC
Open the unit by pushing the safety catch located on the front of the unit.
Turn on your Zip the Robot Learning PC using the [On] button located on the lower left of the keyboard.
At the end of your session, remember to turn off the power using the [Off] button on the lower left of the
keyboard. (Attention: Zip the Robot Learning PC has no data storage capacity.)
Mouse Jack
4