Removing The System Board - Dell Inspiron One 2305 Service Manual

Back to Contents Page
System Board
Dell™ Inspiron™ One 2305/2310 Service Manual
Removing the System Board
Replacing the System Board
Entering the Service Tag in the BIOS
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
Removing the System Board
1. Follow the instructions in
2. Remove the back cover (see
3. Follow the instructions from
4. Remove the system-board shield (see
5. Remove the MXM-assembly fan (see
6. Remove the MXM-assembly (see
7. Remove the memory module(s) (see
8. Remove the Mini-Card(s) (see
9. Remove the processor heat-sink fan (see
10. Remove the processor heat-sink (see
11. Remove the processor (see
NOTE:
12. Disconnect all the cables connected to the system board.
13. Using a hex nut driver, remove the two hex nut screws that secure the system board to the chassis.
14. Remove the eight screws that secure the system board to the chassis.
15. Lift the system board at an angle toward the side of the computer and out of the chassis.
NOTE: The appearance of the system board may vary based on your computer model
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Handle components and cards by their edges, and avoid touching pins and contacts.
Before You Begin.
Removing the Back Cover).
step 2 to step 5 in Removing the Front
Removing the System-Board
Removing the MXM-Assembly
Removing the MXM
Removing Memory
Removing the Mini-Card(s)).
Removing the Processor Heat-Sink
Removing the Processor Heat
Removing the Processor).
Make note of the cable routing before disconnecting the cables from the system board.
UserManuals.info
Stand.
Shield).
Fan).
Assembly).
Module(s)).
Fan).
Sink).