Compaq ARMADA 3500 3500 User Manual page 16

Slide forward the display release latches on the left and right sides
of the display, then raise the display to a comfortable viewing
angle.
Slide the power switch to turn on the computer. The
power/suspend light indicates the computer is on.
When you begin software setup, online instructions guide you
through the setup process.
After you begin software setup, you must complete
the entire process, which may require up to 20 minutes. Make sure
the computer is plugged in for this process to ensure that software
setup is uninterrupted.
To move around the screen while making selections and
entering information:
press the key,
press the cursor (arrow) keys, or
use the pointing device built into the computer keyboard.
To save your selections, press the
pointing device buttons below the computer keyboard.
To restore the screen if it is cleared by the screen saver during
a period of keyboard and pointing device inactivity, press th
key.
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 3:50 PM
Part Number: 310296-002 File name: Ch01.doc
key or press one of the