Compaq ARMADA 3500 3500 User Manual page 143

Modem loses The connection from
connection the phone line to the
modem is loose.
Call Waiting has not
been disabled.
Hibernation was
initiated or a low-
battery condition
occurred.
Troubleshooting
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 4:55 PM
Part Number: 310296-002 File name: Ch16.doc
Disconnect, then
reconnect the phone
cable. Reestablish
connection.
To disable Call Waiting:
1. Click Start, Control
Panel, double-click
Modems.
2. From the General tab
of the Modems
Properties page, click
Dialing Properties.
3. From the My Location
tab of the Dialing
Properties page,
check the box labeled
"This location has call
waiting." Then select
*70, 70#, or 1170 from
the drop-down list to
disable call waiting for
your dialing area.
Restart the
communications
software to restore
the original modem
settings after exiting
Hibernation or resolving
the low-battery condition.
Continued