Compaq ARMADA 3500 3500 User Manual page 150

Characters on The brightness and/
computer display or contrast controls
are dim are not properly set.
Screen is blank and A screen blanking
the power/suspend utility is initiated.
light is on
Brightness and
contrast need
adjusting.
Screen save was
initiated.
Screen is blank and Suspend is initiated.
the power/suspend
light is blinking
Screen is blank and Computer entered a
the battery charge low battery condition.
light is blinking
The popup windows used to control brightness and contrast
display correctly only when you are in an application that supports the
popup video mode. If the popups do not display correctly, exit your
application and press the hotkeys again to invoke the popup windows.
Writer: Lorise Fazio Saved by: J Abercrombie Saved date: 12/08/98 4:55 PM
Part Number: 310296-002 File name: Ch16.doc
Press Fn+F10 to adjust
brightness. On models
with passive matrix
displays, you can also
press Fn+F9 to adjust
contrast.
Press any key and/or
enter your power-on
password to return your
information to the screen.
Press to adjust
brightness. On models
with passive matrix
displays, you can also
press to adjust
contrast.
Press any key to return
your information to the
screen.
Exit Suspend by pressing
the suspend button
If possible, immediately
connect the computer to
an external power source.
If an external power
source is not available,
initiate Hibernation by
pressing + the power
button, or let the computer
automatically go into
Hibernation.
The computer has not
completed Hibernation
until all lights are off.
Continued
Troubleshooting