EVEREST_F8K4-10-06H_Edition1 Page244
Friday, August 11 2006 10:38 AM
Maintenance and Care
Owner Maintenance
High-mount brake light
Due to the complexity and difficulty of
the procedure, the LED bulbs should be
replaced by an expert repairer, we
recommend an Authorised Ford Repairer.
Brake lights/Tail lights, Rear direction
indicator lights
1. Open the back door.
2. Turn the bolts anticlockwise and
remove them.
3. Pull the unit rearward to remove it.
4. Turn the socket and bulb assembly
anticlockwise and remove it.
5. Disconnect the bulb from the socket.
Rear direction indicator lights
Brake lights/Tail lights
6. Install the new bulb in the reverse order
of removal.
8-32
í
Some models.
Form No.F8K4-10-06H
í
Reverse lights
1. Turn the socket and bulb assembly
2. Disconnect the bulb from the socket.
Number plate lights
1. Turn the screws anticlockwise and
2. Remove the lens and disconnect the
3. Install the new bulb in the reverse order
Black plate (244,1)
anticlockwise and remove it.
remove them.
bulb.
of removal.