Ford Everest 2006 Manual page 18

EVEREST_F8K4-10-06H_Edition1 Page20
Friday, August 11 2006 10:36 AM
Essential Safety Equipment
Seats
WARNING
Make sure the stowed seats are
secured with the holding straps:
A seat not secured with a holding
strap is dangerous. The seat could fall
down and cause serious injury.
6. Adjust the holding strap to tighten it
securely on the head restraint upright.
NOTE
The holding strap hook is kept in the
pocket under the seat.
To return second-row seat to the
original position
1. Support the seat while detaching the
holding strap hook from the head
restraint upright so that the seat doesn't
fall down.
2. Tuck the holding strap hook in the
pocket.
Holding strap
hook
Pocket
2-10
Form No.F8K4-10-06H
3. Carefully lower the seat backward until
it locks in place. Attempt to lift the seat
up to make sure it is firmly locked
down.
4. Lift the seatback upright. Attempt to
move the seatback forward and
backward to make sure it is locked.
Pocket
Return the seatback to its upright
position in one continuous motion.
Otherwise the seat will not be securely
locked, and could flip forward suddenly
causing injury. If this happens, release
the seat lock by pulling the lever and
repeat the procedure.
Black plate (20,1)
CAUTION