Ford Everest 2006 Manual page 239

EVEREST_F8K4-10-06H_Edition1 Page241
Friday, August 11 2006 10:38 AM
WARNING
Never touch the glass portion of a
halogen bulb with your bare hands
and always wear eye protection when
handling or working around the
bulbs:
When a halogen bulb breaks, it is
dangerous. These bulbs contain
pressurised gas. If one is broken, it
will explode and serious injuries could
be caused by the flying glass.
If the glass portion is touched with
bare hands, body oil could cause the
bulb to overheat and explode when lit.
Always keep halogen bulbs out of the
reach of children:
Playing with a halogen bulb is
dangerous. Serious injuries could be
caused by dropping a halogen bulb or
breaking it some other way.
qReplacing Exterior Light Bulbs
Replacing the headlight
1. Make sure the headlight switch is off.
2. Lift the bonnet.
Form No.F8K4-10-06H
Black plate (241,1)
Owner Maintenance
3. Remove the attachment nuts and
washer fluid reservoir before replacing
the right bulb.
Nuts
4. Detach the electrical connector from
the bulb and pulling it to the rear.
5. Pull off the sealing cover.
6. Unhook the bulb retaining spring.
Maintenance and Care
8-29