Ford Everest 2006 Manual page 174

EVEREST_F8K4-10-06H_Edition1 Page176
Friday, August 11 2006 10:37 AM
Interior Comfort
Audio System
qOperating the Radio
Band selector button
Traffic information button
Scan
button
Auto
memory
button
Radio ON
Press the band selector button (
turn the radio on.
Band selection
Press the band selector button (
change FM1, FM2 and AM.
The selected mode will be indicated. If
FM stereo is being received, "ST" will be
displayed.
NOTE
If the FM broadcast signal becomes
weak, reception automatically changes
from STEREO to MONO for reduced
noise, and the "ST" indicator will go
out.
6-48
Form No.F8K4-10-06H
Display
Channel preset buttons
Tuning
) to The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
) to
on preset channels.
NOTE
If the power supply is interrupted (fuse
blows or the battery is disconnected),
the preset channels will be cancelled.
Manual tuning
Pressing the manual tuning button ( ,
) will change the frequency higher or
lower.
Black plate (176,1)
Manual/Seek tuning:
Lower
Higher
frequency
frequency