Table of Contents
Advertisement
Introduction
The Kommander-KA amplifiers are available in two versions:
4-channel units and 8-channel units. Both versions implement
multichannel free routing and DSP with Grouping, Input EQ,
Output EQ, Level adjustment, Dynamic Limiters and Delay per
channel.
Connectors
4-channel units
input
Kommander-KA14 I
4
Kommander-KA34
4
Kommander-KA104
4
Connectors
8-channel units
input
Kommander-KA18
8
Kommander-KA28
8
Kommander-KA68
8
Kommander-KA208
8
The dedicated K-array Connect app and the K-framework3
software for Mac and PC allow user access to the highly
configurable output section and the powerful DSP making any
Kommander-KA amplifier a flexible driving unit.
In order to remote control a Kommander-KA amplifier download
the K-array Connect app or the K-framework3 software:
click to go
Power Rating
per channel
output
4
600W @ 2Ω
4
750W @ 4Ω
4
2500W @ 4Ω
Power Rating
per channel
output
8
150W @ 4Ω
8
600W @ 2Ω
8
750W @ 4Ω
8
2500W @ 4Ω
WINDOWS and OSX software
K-framework3
click to go
Kommander-KA
Getting Started
1. Connect the input and output signal cables according to
the configuration you want to achieve.
2. Connect the Kommander-KA02 I to its power supply and
plug the power cord to the AC mains socket.
3. Use the K-array Connect app to connect your mobile
device to the Kommander amplifier unit
4. Set the amplifier Output Configuration*: the Devices menu
will show the device(s) you can manage with the app:
press on the image of the unit to configure.
Carefully check that the factory presets match
the actual configuration of passive speakers
connected to the amplifier connectors.
5. Set the signal routing from the input channels to the
output channels in the ROUTING tab.
6. Check the signal volume in the VOLUMES tab.
7. Enjoy K-array sound!
User Guide
9
Advertisement
Table of Contents
