Table of Contents
Advertisement
Kommander-KA
User Guide
Network
This menu section allows the user to monitor and set the
network parameters.
WiFi
The WiFi can be configured to connect the unit to a wireless
LAN as a CLIENT or, alternatively, to create an independent local
wireless network behaving as HOT SPOT.
By default the WiFi is set as HOT SPOT allowing any mobile
device to connect to the unit.
By default, the SSID of the HOT SPOT is composed by the word
"K-array-" followed by the serial number of the unit; the default
password is the unit's serial number. The SSID and the password
of the HOT SPOT can be modified manually: the QR Code will
change accordingly.
When set as CLIENT, enter the data of the WiFi LAN in order to
connect the unit to that network.
The power switch allows to toggle on and off the WiFi.
Ethernet
Set the IP addressing static or DHCP.
18
Advanced
This menu provides access to the system informations, like the
device name and ID and the system update tool.
System Update
In order to update the internal DSP software and osKar operating
system two methods are available: via an Internet connection or
USB key.
Update via Internet
1. Connect the Kommander-KA amplifier to Internet –
possibly via a wired connection.
2. The Download button turns active when a new software
version is available on K-array server: when active, press on
the Download button to start downloading the software
from the Internet. This step doesn't install the software:
the installation shall be actiated manually.
3. The Update button activates when the software is completely
dowloaded: when active, press on the Update button to start
updating the Kommander-KA amplifier.
Advertisement
Table of Contents
