Table of Contents
Advertisement
Kommander-KA
User Guide
K-array Connect Mobile App
The K-array Connect mobile app allows to access the
Kommander-KA amplifiers wireless, leveraging on the local Wi-Fi
established by the built-in hot spot.
Main menu
List of available
devices in the
network
Tab menu
Preset menu
Load the
loudspeaker
factory presets
on the output
channels
and manage
the device
configuration
presets.
Preset menu
MATRIX
Set the signal
routing from
the DSP to
the output
connectors.
14
Connecting To The Built-In Hot Spot
1. Ensure the Wi-Fi of the mobile device is on.
2. Launch the K-array Connect app.
3. If the list of available devices is empty touch the SCAN QR
CODE button and use the mobile device camera to frame
the QR code in the bottom panel of the Kommander-KA
unit: this provides the mobile device to connect to the
amplifier's hot spot.
Access the
4. Click on the image of the Kommander-KA unit to manage
embedded web app
the amplifier with the K-array Connect app or click on the
button with the globe in order to lanch the embedded web
Make the status
LED blinking
app.
Routing menu
INPATCH
Patch the input
signals to the
DSP inputs.
Volumes menu
Manage the
the input
and output
volumes.
Scroll down to update
the list of devices or
touch the Scan QR
code button to activate
the camera in order to
connect the unit
In case you need to connect manually connect to
the amplifier's hot spot, the default password is
the device serial number, e.g. K142AN0006
(case sensitive).
The K-array active unit
has a label with the QR
code for connecting the
local Wi-Fi: target the
code to establish the
wireless connection
Connected and
discovered!
Advertisement
Table of Contents
