HP StorageWorks vs80 User Manual page 68

Table 5
Error Codes
Error Code
3 0 94 Cartridge unload error.
3 0 95 Import error.
3 0 96 Export error.
3 0 A0 Carousel motion failure.
3 0 A1 Cartridge transport position
error.
3 0 A2 Gripper position error.
3 0 A3 Cartridge pick error.
3 0 A4 Mail slot position error.
3 0 A5 Fan Error.
3 0 B0 ROM error.
68 Diagnostics and Troubleshooting
Description Details
A failure occurred while trying to unload a
cartridge from the drive to its slot.
An error occurred while trying to import a data
cartridge to a carousel slot.
An error occurred while trying to export a data
cartridge from its carousel slot. Can be caused by
an empty slot that is expected to be full.
Error occurred during carousel movement
(position not found). Could be caused by a
missing or misaligned cartridge carrier, an
obstruction, or an unexpected cartridge in the
carousel path.
Cartridge transport element is unable to reach its
desired position. Failure occurred while trying to
place a cartridge into or remove a cartridge from
the drive or a slot.
Gripper unable to reach position.
Error occurred while trying to pull a cartridge
from the drive or a carousel slot.
The mail slot door was not in the requested
position during device operation. Can be caused
by manually opening the door or a cartridge or
other obstruction is blocking the door. Try
removing the cartridge or obstruction, then
power cycle or reset the autoloader.
Autoloader processor detected a fan error.
Cycle power on the autoloader and attempt the
operation again. If the error recurs, contact your
technical support representative.
Chapter 4