HP StorageWorks vs80 User Manual page 44

44 Autoloader Administration
Autoload Mode
Note Autoload mode is only applicable if the autoloader is in
Sequential mode.
This option turns Autoload mode on or off. When the autoloader is powered
on and Autoload mode is on, the autoloader automatically loads the cartridge
from the lowest numbered full slot into the tape drive. When Autoload mode is
off, no cartridges are automatically loaded at power on.
To access this option, follow these steps:
1. From the Home Screen or main menu, press the [+] or [-] button until
Configuration appears on the top line of the LCD screen.
2. Press the [Enter] button to select.
3. Press the [+] or [-] button until Autoload Mode appears on the LCD screen.
The second line on the LCD screen indicates the current status, either On or
Off.
4. Press the [Enter] button. The LCD screen indicates whether you are about
to turn Autoload mode on or off.
5. Press the [Enter] button to accept the change to Autoload mode or
[Cancel] to exit and not save the changes.
Chapter 3