System - Optoma H27 User Manual

User Controls
Lamp Settings
Lamp Hour: Displays the cumulative lamp operating time.
4
Lamp Reset: Reset the lamp setting only when the new
4
lamp is replaced.
Lamp Reminding: Choose this function to show or to hide the
4
warning message when the changing lamp message is displayed.
The message will show up 30 hours before end of life.
Language
Choose the multilingual OSD menu . Use the
your preferred language.
Press "Enter" to finalize the selection.
Menu Location
Choose the menu location on the display screen.
Auto Power Off (min)
Sets the interval of power-off of the system, if there is no signal
input. (In minutes)
High Altitude
Choose "ON" to turn on High Altitude mode. Operates the fans at
full speed continuously to allow for proper high altitude cooling of
the projector.
Blanking
Use this feature to display a black or blue screen when no signal is
available.
30

System

or key to select