Image-Ii (Computer Mode) - Optoma H27 User Manual

User Controls
White Peaking
Use the white peaking control to set the white peaking level of
DMD chip. 0 stands for minimal peaking, and 10 stands for
maximum peaking. If you prefer a stronger image, adjust towards
the maximum setting. For a smooth and more natural image,
adjust towards the minimum setting.
Color Temp.
Adjust the color temperature. At higher temperature, the screen
looks colder; at lower temperature, the screen looks warmer.
Advanced Adjustment
Press "Enter" to adjust the red, green and blue colors for advanced
adjustment of brightness and contrast of the individual colors.
Signal
Frequency: Changes the display data frequency to match the
4
frequency of your computer's graphic card. When you experi-
ence a vertical flickering bar, use this function to make an
adjustment.
Tracking : Synchronizes the signal timing of the display with the
4
graphics card. If you experience an unstable or flickering image,
use this function to correct it.
H. Position: Adjusts the horizontal position.
4
V. Position: Adjusts the vertical position.
4
24
Image-II
(Computer Mode)