Adjusting the Projected Image
Adjusting the Image Height
The projector is equipped with an elevator foot to adjust the
image height.
To raise or lower the image :
1. Turn the projector over and locate the elevator foot. Press
the elevator button
adjusted.
2. While holding down the elevator button, adjust the foot to
the desired height,
elevator foot into position.
3. Use
to fine-tune tilt-adjustment
4. Lower the projector so it rests on its foot; adjust as
needed.
1
Elevator Button
Installation
to extend the foot so it may be
then release the button to lock the
2
Elevator Foot
13
3
Tilt-adjustment Foot