Remote Diagnosis; Data Protection; Basic Settings; Overview Of The Basic Settings - Bosch WAV28G43 Instructions For Use And Assembly

Table of Contents

Advertisement

de Basic settings
3. reset choose.
a The network settings are
reset.
Tip: If you want to operate your device
again via the Home Connect app, you
have to re-connect it to the home
network and the
Connect the Home Connect app.

15.10 Remote diagnosis

Customer service can access your
device via remote diagnosis if you
contact customer service with the
corresponding request, and your
device with the
Home Connect server is connected
and remote diagnosis is available in
the country in which you are using the
device.
Tip: Further information and notes on
the availability of remote diagnosis in
your country can be found in the
Service / Support area of the local
website: www.home-connect.com

15.11 Data protection

Please note the information on data
protection.
When your device is connected to a
home network connected to the
Internet for the first time, your device
transmits the following categories of
data to the
Home Connect server
(Initial registration):
¡ Unique device identifier (best
based on device keys and the MAC
address of the built-in Wi-Fi
communication module).
¡ Wi-Fi Com-
communication module (for
information technology protection
of the connection).
¡ The current software version and
Hardware version of your home appliance.
56
¡ Status of any previous
reset to factory settings.
This initial registration prepares the
use of the Home Connect
functionalities and is only required at
the time at which you would like to
use the Home Connect functionalities
for the first time.
Note: Note that the Home Connect
functionalities can only be used in
conjunction with the Home Connect
app. Information on data protection
can be found in the
Home Connect app can be called up.

1 6 basic settings

S.
You can adjust your device to your
needs.
16.1 Overview of the basic
settings
Here you will find an overview of the
size and settings of the device.
Basic
position
End signal
Key signal
description
The volume
of the signal
End of program
to adjust.
The volume
of the signal at
Operate the
Set buttons.

Advertisement

Table of Contents
loading

Table of Contents