Braun FX3030 Owner's Manual page 7

Working With Second Bowl System
1. Only one working bowl can be operated at a time.
2. The working bowl which is not used must be in the upper position or
additionally, can be turned in the «click» direction where it is locked
in place. When the arrow markings are aligned, the bowl can be taken
off.
3. For safety reasons, always put the protective cover onto the free drive
shaft after a bowl has been taken off.
Double safety feature
The appliance can only be switched on when the desired working bowl
with lid is properly engaged. If the lid is opened during operation, the
motor switches off automatically. As in this case the motor switch 3 is still
on «I», turn it back to «O» to avoid switching on the motor accidentally.
ATTACHING THE WORKING BOWLS
The food processor bowl is
operated on the large drive place
of the motor block
The chopper bowl is operated on
the small drive place. With the
motor switched off, place the
respective bowl onto its drive
place matching the arrow on the
bowl with the arrow on the motor
block (See fig A).
Then turn the bowl in the
«function» direction until the
lower fixed stop is reached. The
bowl on the other drive place
must be in the lifted position.
If the other drive place is free, put
on the protective cover m.
Put the attachment needed
(see instructions for each of the
attachments) onto the drive shaft
of the bowl and push it down as
far as it will go (see fig B).
NOTE: When using the food processor
bowl, always insert the required
attachments before adding ingredients.
1
2
B
A
1
2
Pg 6