Using The Listening Modes; Selecting The Listening Modes - Onkyo TX-SR703 Instruction Manual

TX-SR803_En.book Page 60 Friday, August 26, 2005 9:26 AM

Using the Listening Modes

Selecting the Listening Modes

For a description of each listening mode, see "About the
Listening Modes" on page 62.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial, optical, or HDMI).
• Listening mode availability depends on the
format of the current input signal.
• While a pair of headphones is connected,
you can only select the Pure Audio, Mono,
Direct, or Stereo listening mode.
Selecting on the AV Receiver
STEREO
STANDBY/ON
STANDBY
ZONE 2
POWER
ON OFF
MULTI CH DVD
PURE AUDIO VIDEO 1 VIDEO 2 VIDEO 3
PHONES
ZONE 2 OFF TONE STEREO DIMMER MEMORY
LISTENING MODE
ZONE 2 LEVEL
PURE AUDIO LISTENING MODE
■ [PURE AUDIO] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver's dis-
play is turned off and only the HDMI OUT outputs
video signals. Pressing this button again will select
the previous listening mode.
■ [STEREO] button
This button selects the Stereo listening mode.
■ LISTENING MODE [
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
60
MASTER VOLUME
PHONO TAPE TUNER CD DISPLAY
VIDEO 4
TUNING VIDEO 4 INPUT
MODE SETUP RETURN ENTER SETUP MIC
CLEAR PRESET PRESET
TUNING DIGITAL S VIDEO VIDEO L AUDIO R
]/[ ] buttons
Selecting with the Remote Controller
+
CH
DISC ENTER
ALBUM
-
PREV
CH
DISPLAY
REC PLAYLIST
SURR
LISTENING MODE
STEREO
STEREO SURR
REPEAT AUDIO SUBTITLE
PURE A
PURE A DIRECT THX
TEST TONE CH SEL LEVEL
DIRECT
OPEN/CLOSE VIDEO OFF
L NIGHT
RC-620M
■ [STEREO] button
This button selects the Stereo listening mode.
■ [SURR] button
This button selects the Dolby Digital and DTS listen-
ing modes.
■ LISTENING MODE [
]/[
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
■ [PURE A] button
This button selects the Pure Audio listening mode.
When this mode is selected, the AV receiver's dis-
play is turned off and only the HDMI OUT outputs
video signals.
■ [DIRECT] button
This button selects the Direct listening mode.
■ [THX] button
This button selects the THX listening modes.
■ [ALL ST] button
This button selects the All Channel Stereo listening
mode.
VOL
MUTING
RANDOM
,
PLAY MODE
ALL ST
ALLST
LEVEL
THX
Re-EQ
] buttons