Table of Contents
Advertisement
Applications
Setting the Sample Rate parameter lets the S/PDIF device know what rate
to expect.
3.
4.
For more information, please see "Setting the word clock source in digital
audio software" on page 16.
If you are using the Alesis BRC, read the instructions under "Using the
Alesis BRC: 1212 I/O output to ADAT input," on page 36.
Unlike the S/PDIF-to-ADAT routing described above, the S/PDIF device
derives word clock sync automatically from the input signal.
5.
Processing ADAT audio through a S/PDIF device
The 1212 I/O allows you to send audio data from the ADAT inputs
through a S/PDIF signal processor–such as an effects processor, digital EQ,
etc.–and then back to the ADAT outputs.
To route ADAT audio through a S/PDIF device;
1.
2.
3.
As described under ADAT-S/PDIF routing, above, setting the Sample Rate
parameter lets the S/PDIF device know what rate to expect.
4.
5.
For more information, please see "Setting the word clock source in digital
audio software" on page 16.
If you are using the Alesis BRC, read the instructions under "Using the
Alesis BRC: 1212 I/O output to ADAT input," on page 36.
Again, the S/PDIF device derives word clock sync automatically.
6.
Using a S/PDIF processor with multiple ADATs and the Alesis BRC
To record the output of the S/PDIF processor onto another ADAT machine,
the recording machine should be in the digital loop after the 1212 I/O, and
34
Set the Clock Source to ADAT.
Set the ADAT system's word clock to Internal.
If you are using the Alesis BRC, press the BRC's Digital I/O button
until you see the "Select source with track buttons" page, and then
select the same tracks as you did in step 1.
Set the desired ADAT inputs to the S/PDIF L and S/PDIF R outputs.
Set inputs S/PDIF L and S/PDIF R to the desired ADAT output
channels.
Set the Sample Rate to the same rate as the ADAT system.
Set the Clock Source to ADAT.
Set the ADAT system's word clock to Internal.
If you are using the Alesis BRC, press the BRC's DIGITAL I/O
button until you see the "Select source with track buttons" page,
and then select the same tracks as you did in step 1.
Korg 1212 I/O
Advertisement
Table of Contents
