Philips S5898 Manual page 16

16
English
Cleaning the pop-up trimmer
1 Make sure that the appliance is switched off and
disconnected from the wall socket.
2 Press the release button on the shaving unit and pull
the shaving head holder off the shaving unit.
3 Rinse the hair chamber and shaving head holder
under the tap.
4 Remove the shaving heads. For detailed instructions,
see 'How do I replace the shaving heads?'.
Note: Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally put a cutter in the wrong shaving guard,
it may take several weeks before optimal shaving
performance is restored.
5 Clean the cutter and guard under the tap.
6 Shake off excess water.
7 Put the shaving heads back into the shaving unit. For
detailed instructions, see 'How do I replace the
shaving heads?'.
8 Insert the hinge of the shaving head holder into the
slot in the top of the shaving unit and close the
shaving unit.
Clean the trimmer after each use to prevent clogging and
damage.
Never dry the trimmer teeth with a towel or tissue, as
this may damage the trimmer teeth.