Philips S5898 Manual page 11

Charging in the charging stand (specific models only)
4 Insert the USB supply unit into the wall socket.
- While the appliance is in quick charge mode, the
lights of the battery status indicator light up one
after the other. After approximately 5 minutes, the
bottom light of the battery status indicator flashes.
The battery now contains enough energy for one
full shave.
- While the appliance charges, first the bottom light
of the battery status indicator flashes and then
lights up continuously. Next the second light
flashes and then lights up continuously, and so on
until the appliance is fully charged.
- When the appliance is fully charged, all three
battery indicator lights light up continuously. After
approx. 30 minutes, the light goes out
automatically.
5 After charging, remove the USB supply unit from the
wall socket, pull the USB plug out of the supply unit
and then pull the small plug out of the appliance.
Warning: Keep the USB cable, the USB supply unit
and the charging stand dry.
1 Make sure the appliance is switched off.
2 Insert the small plug of the USB cable into the
charging stand.
3 Insert the USB plug into the USB supply unit (not
provided).
11
English