Digital Audio Input Setup; Changing The Input Display - Onkyo HT-SR750 Instruction Manual

First Time Setup—Continued

Digital Audio Input Setup

2, 3
STANDBY/ON
STANDBY
MULTI CH DVD
PHONES
DISPLAY DIGITAL INPUT TONE
To enjoy Dolby Digital and DTS, you must connect your
DVD player to the AV receiver digitally (coaxial or opti-
cal).
These are the default digital audio input assignments.
Input selector
DVD
VCR/DVR
CBL/SAT
TAPE
CD
AUX
You can change the digital audio input assignments if
necessary. For example, if you connect your DVD player
to the OPTICAL 1 DIGITAL IN (OPT1), you must
assign that input to the DVD input selector, as follows.
1
Press the input selector button
for the input selector that you
want to assign.
VCR/DVR CBL/SAT
DVD
(Digital inputs cannot be assigned to
the TUNER input selector.)
AUX TAPE
C D
2
Press the [DIGITAL INPUT]
button.
DIGITAL INPUT
The current assignment appears.
3
Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX1,
DIGITAL INPUT
COAX2, OPT1, OPT2, or "– – – –"
(analog).
Note:
Make sure that components connected digitally are con-
figured to output digital audio. Refer to the relevant man-
uals.
40
1
TUNING
PRESET
VCR/DVR CBL/SAT AUX TAPE TUNER C D
SETUP ENTER RETURN
SETUP MIC VIDEO
STEREO LISTENING MODE DIMMER MEMORY TUNING MODE
CLEAR
Default assignment
COAX 1
OPT 1
COAX 2
- - - -
OPT 2
- - - -

Changing the Input Display

If you connect an
recorder, CD recorder, or RI Dock to the TAPE IN/OUT
or CBL/SAT IN jacks, for
MASTER VOLUME
must change this setting.
This setting can only be changed on the AV receiver.
AUX INPUT
L AUDIO R
STANDBY/ON
STANDBY
PHONES
1
TAPE
or
CBL/SAT
2
TAPE
or
CBL/SAT
Note:
DOCK can be selected for the TAPE input selector or
CBL/SAT input selector, but not both at the same time.
-capable Onkyo MiniDisc
to work properly, you
1, 2 1, 2
MULTI CH DVD VCR/DVR CBL/SAT AUX TAPE TUNER C D
DISPLAY DIGITAL INPUT TONE STEREO LISTENING MODE DIMMER MEMORY TUNING MODE
CLEAR
Press the [TAPE] or [CBL/SAT]
input selector button so that
"TAPE" or "CBL/SAT" appears on
the display.
Press and hold down the [TAPE]
or [CBL/SAT] input selector but-
ton (about 2 seconds) to change
the setting.
Repeat this step to select MD, CDR, or
DOCK.
For the TAPE input selector, the setting
changes in this order:
→ →
TAPE MD CDR
For the CBL/SAT input selector, the
setting changes in this order:
↔
CBL/SAT DOCK
MASTER VOLUME
TUNING PRESET
RETURN
SETUP ENTER
AUX INPUT
SETUP MIC VIDEO L AUDIO R
→
DOCK