Digital Audio Input Setup; Changing The Input Display - Onkyo HT-SR800 Instruction Manual

HT-SR800_En.book Page 41 Thursday, January 25, 2007 10:28 AM
First Time Setup —Continued

Digital Audio Input Setup

STANDBY/ON
STANDBY
MULTI CH DVD VCR/DVR CBL/SAT
PHONES
A SPEAKERS B TONE STEREO
To enjoy Dolby Digital and DTS, you must connect your
DVD player to the AV receiver digitally (coaxial or opti-
cal).
These are the default digital audio input assignments.
Input selector
DVD
VCR/DVR
CBL/SAT
TAPE
CD
AUX
You can change the digital audio input assignments if
necessary. For example, if you connect your DVD player
to the OPTICAL 1 DIGITAL IN (OPT1), you must
assign that input to the DVD input selector, as follows.
1 Press the input selector button
for the input selector that you
want to assign.
DVD VCR/DVR CBL/SAT
(Digital inputs cannot be assigned to
the TUNER input selector.)
AUX TAPE
C D
2
Press the [DIGITAL INPUT]
button.
DIGITAL INPUT
The current assignment appears.
3
Press the [DIGITAL INPUT] but-
ton repeatedly to select COAX1,
DIGITAL INPUT
COAX2, OPT1, OPT2, or "– – – –"
(analog).
Note:
Make sure that components connected digitally are con-
figured to output digital audio. Refer to the relevant man-
uals.
1 2, 3
MASTER VOLUME
TUNING PRESET
AUX TAPE TUNER C D SETUP ENTER RETURN
AUX INPUT
SETUP MIC VIDEO L AUDIO R
LISTENING MODE DISPLAY DIGITAL INPUT DIMMER MEMORY TUNING MODE
CLEAR
Default assignment
COAX 1
OPT 1
COAX 2
- - - -
OPT 2
- - - -

Changing the Input Display

If you connect an -capable Onkyo MiniDisc
recorder, CD recorder, or RI Dock to the TAPE IN/OUT
or CBL/SAT IN jacks, for
must change this setting.
This setting can only be changed on the AV receiver.
1, 2 1, 2
STANDBY/ON
STANDBY
MULTI CH DVD VCR/DVR CBL/SAT AUX TAPE
PHONES
A SPEAKERS B TONE STEREO LISTENING MODE DISPLAY
1 Press the [TAPE] or [CBL/SAT]
input selector button so that
"TAPE" or "CBL/SAT" appears on
the display.
TAPE
or
CBL/SAT
2
Press and hold down the [TAPE]
or [CBL/SAT] input selector but-
ton (about 2 seconds) to change
the setting.
TAPE
Repeat this step to select MD, CDR, or
or
DOCK.
For the TAPE input selector, the setting
changes in this order:
CBL/SAT
→
TAPE MD
For the CBL/SAT input selector, the
setting changes in this order:
CBL/SAT
Note:
DOCK can be selected for the TAPE input selector or
CBL/SAT input selector, but not both at the same time.
to work properly, you
MASTER VOLUME
TUNING PRESET
TUNER C D SETUP ENTER RETURN
AUX INPUT
SETUP MIC VIDEO L AUDIO R
DIGITAL INPUT DIMMER MEMORY TUNING MODE
CLEAR
→ →
CDR DOCK
↔
DOCK
41