Clearing The Master Power Macro; Re-Assigning Device Keys; Using Channel Scan - One for All URC-4021 User Manual

CTGAE4P 4021 manual booklet
PROGRAMMING A MASTER POWER MACRO (continued)

Clearing The Master Power Macro

1.
2.
3.

RE-ASSIGNING DEVICE KEYS

The One For All 4 Device Universal Remote Control can be set to control a
second PVR,VCR, or DVD player. For example, to control a TV, a cable box,
and
two DVD players
DVD player as follows:
1.
2.
3.
4.
To re-assign a second VCR or PVR (or DVR) to the unused
steps 1 through 4. However, in step 3 substitute
substitute for
DVD
second VCR or PVR (or DVR). See
NOTE: Only one device can be assigned to an unused device key at a time.

USING CHANNEL SCAN

In the or
CBL/SAT
channels. Or, if programmed, use the
channels to view a desired channel (see
on next page. )
1.
Press and hold until the
SET
then release .
SET
Enter - - . The
9 9 5 LED
once.
Press and hold until the
SET
. The
Master Power Macro
SET
, re-assign the unused
On the remote control, press and hold
(red light) blinks twice, then release
Enter - - . The
9 9 2 LED
Press once.
DVD
Press once. The
VCR/PVR
key is now ready to be set up to control your second DVD
player. See
Programming Device Control
. Now the
VCR/PVR DVD
Programming Device Control
mode, use the
TV FAV
Press or once.
CBL/SAT TV
11
5/24/04 12:10 PM
(red light) blinks twice,
LED
will blink twice. Then press
blinks twice, then release
LED
is now cleared.
key to operate the second
VCR/PVR
SET
.
SET
will blink twice.
will blink twice. The
LED
on page 8.
for
VCR/PVR
key will be ready to be set up as your
key to start a 3-second scan of all
key to scan only your favorite
FAV
Programming Favorite Channel Scan
Page 11
POWER
until the
LED
VCR/PVR
key, repeat
DVD
, and in step 4
DVD
on page 8.