•
Touch
and
channel.
•
Touch
and
volume.
•
Touch
on the map to return to
the TV menu.
Quit
•
Touch
to stop receiving a TV
signal.
TV signal strength and system
messages are displayed in the status
bar in the upper-left corner of the
screen.
Using a reverse Camera
If a reverse camera has been installed
in your vehicle, you can view the
output of the camera on your nüvi
1490TV.
1. Connect the camera to your nüvi
through the video-in connector on
the left side of the nüvi. See
2.
nüvi 1490TV Series Quick Start Manual
to select a
to adjust the
page
2. Touch TV.
3. If necessary, follow the on-screen
instructions.
Securing Your nüvi
1. Ensure that you are at your
security location and that your nüvi
is receiving satellite signals.
2. Touch
Tools
Security.
3. Touch the button below
Lock.
4. Enter a four-digit PIN.
5. Touch Set.
NOTE: If you forget your PIN and
your security location, you must
send your nüvi to Garmin to get
it unlocked. You must also send a
valid product registration or proof of
purchase.
>
Settings
>
garmin
11