Husqvarna YTH24K54 Operator's Manual page 5

The blades are disengaged.
The blades are engaged.
Risk of carbon monoxide poisoning.
Beware of thrown objects.
Keep bystanders away.
The fire symbol shows a risk, which, if
not obeyed, can cause death, serious
injury and/or damage.
Sound power level.
2047 - 001 - 04.01.2023
Cruise control.
Keep hands and feet
away from this area.
Do not operate the prod-
uct on slopes that are
more than 15°.
Hot surfaces. Do not
touch.
The deflector shield on
the cutting deck must be
installed when you oper-
ate the product.
The grass catcher must
be installed when you
operate the product.
Freewheel (automatic models only).
Hour meter
The hour meter shows how many hours the engine
has been in operation. Refer to
page 3 for the position of the hour meter.
Each 50 hours an oil level symbol will show for 2
Lubrication schedule on page 19 .
hours. Refer to
To manually reset the hour meter, turn the ignition
key to the on position and then to the "STOP"
position 5 times.
Note:
The hour meter only stops when the ignition
key is in the "STOP" position. Make sure that the
ignition key stays in the "STOP" position when the
engine has stopped.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not
from the manufacturer or not approved by the
manufacturer.
• the product is not repaired at an approved
service center or by an approved authority.
Hand entanglement.
Drawbar load.
Product overview on
5