Wpt Pages; To Quickly Select A Wpt Page; Section 7: Wpt Pages - Garmin GNS 430 Pilot's Manual & Reference

SECTION 7: WPT PAGES

7.1 WPT PAGE GROUP
Section 3.1 introduced the GNS 430' s main page groups
(Table 7-1)—NAV, WPT, AUX, NRST—and described
each page in the NAV group. This second page group
(WPT) provides information for the thousands of airports,
VORs, NDBs, intersections, runways, frequencies, and
procedures stored on the Jeppesen NavData Card. A
WPT page is also provided to display information for up
to 1,000 user-created waypoints.
Page Groups
NAV Group WPT Group
see Section 3 10 WPT Pages see Section 10 see Section 8
Table 7-1 Page Groups
Airport Location Airport Runway
Airport Approach Airport Arrival
Intersection NDB
User Waypoint
Figure 7-1 WPT Pages
190-00140-00 Rev. P
AUX Group NRST Group
Airport Frequency
Airport Departure
VOR
GNS 430(A) Pilot's Guide and Reference

To quickly select a WPT page:

1) From any page, press and hold the CLR Key to
select the Default NAV Page (this step may be
skipped if the unit is already displaying any of
the main pages.)
2) Turn the large right knob to select the WPT
Page Group. 'WPT' appears in the lower right
corner of the screen.
3) Turn the small right knob to select the desired
WPT page.
NOTE: The GNS 430 uses International Civil
Aviation Organization (ICAO) identifiers for all
airports. All U.S. airport identifiers which contain
only letters use the prefix 'K'. For example, Los
Angeles International is KLAX under the ICAO
standard. Other airports, such as Otten Memorial
(3VS), that contain numbers in the identifier, do
not require the 'K' prefix. Many foreign countries
use two letter prefixes.
The WPT Page Group includes ten pages (Figure
7-1). While viewing any WPT page, turn the small right
knob to select a different WPT page. The first six pages
provide detailed information for the selected airport:
location, runways, frequencies, approaches, arrivals, and
departures. The last four pages provide information for
intersections, NDBs, VORs, and user-created waypoints.
After a WPT page is selected, information for a waypoint
may be viewed by entering the identifier (or name) of the
desired waypoint. Airports, NDBs, and VORs may be
selected by identifier, facility name, or location (city).
SECTION 7

WPT PAGES

7-1